Dr.BRAJESH TRIPATHI

  • Dr.BRAJESH TRIPATHI
Faculty Profile
Dr.BRAJESH TRIPATHI
Designation :Associate Professor
Qualifications :PhD (IIT Kharagpur), Spl: CFD

PostDoc (Michigan State University)
Contact Detail Dept. of Mechanical(Aeronautical) Engineering, RTU
Email :[email protected]
Research Gate Page :Dr.BRAJESH TRIPATHI on Research Gate
Google Scholar Page :Dr.BRAJESH TRIPATHI on Google Scholar
Phone No. :+91-744-2473910
 

 

 

 

 

 
Research Interests:

Computational Fluid Dynamics (CFD), Turbulent flows, Heating, Ventilation and Air-conditioning (HVAC), Aerodynamics, Parallel Computing and Energy Efficient Buildings.
Brief Research Profile:

Computational Fluid Dynamics, Programming in FORTRAN and MATLAB, Software’s (Ansys FLUENT, PHOENICS, OPENFOAM, COMSOL), Experiments (PIV, Wind tunnel, RADS, Chlorine packaging), Parallel Programming (high performance and cluster coding). These skills are extensively used in various applications of HVAC, Energy Equipment’s, Packaging, Fuel Cells, and Combustion.
 Journal Publication Details:
  1. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Numerical Simulation of Two-Dimensional Fins using theMeshless Local Petrov-Galerkin Method, Engineering Computations, 1(3), 1-46, 2020.
  2. K Nahar, Brajesh Tripathi, K B Rana, Importance of thermal comfort in hospitals-A review, International Journal for research in engineering application and management, 4, 2019. (UGC)
  3. Chandan Gupta, KB Rana, B Tripathi, Evaluation of Combustion Characteristics of Diethyl Ether–Nitromethane–Diesel Blends in CI Engine, Journal of Energy and Environmental Sustainability, 7, 47-51, 2019. (SCOPUS)
  4. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Numerical Simulation of Two-Dimensional Fins using the Meshless Local Petrov-Galerkin Method, Engineering Analysis with Boundary Elements, 5(4), 357-364, 2019. (SCOPUS, https://doi.org/10.18280/mmep.050412)
  5. Kumar C, Rana KB and Tripathi B, Effect of diesel-methanol-nitromethane blends combustion on VCR stationary CI engine performance and exhaust emissions, Environmental Science and Pollution Research, 26(7):6517-6531, 2019. doi: 10.1007/s11356-018-04058-1 2019. (SCI)
  6. Girija &B. Tripathi, Review on Advanced turbulence flow RANS models, International Journal of Scientific Research and Reviews, 7(1), 172-181, 2019.
  7. Ajay Giri, Brajesh Tripathi, Harish Chandra Thakur, Computational Fluid Dynamics Analysis of Airflow in an Idle Passenger Car Cabin, International Journal of Mechanical and Production Engineering Research and Development, 8(4), 675-684, 2018. (SCOPUS)
  8. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Numerical Analysis of a Semi- Infinite Solid with Temperature Dependent Thermal Conductivity using truly Meshfree Method, International Journal of Vehicle Structures and Systems,10(4), 2018. DOI: http://dx.doi.org/10.4273/ijvss.10.4.16. SCI(Q4)
  9. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Numerical Simulation of Two-Dimensional Fluid Flow Problem Using Truly Meshfree Method, Mathematical Modelling of Engineering Problems, 5(4), 357-364, 2018 DOI: 10.18280/mmep.050412.(SCOPUS)
  10. C. Gupta, K. B. Rana and Brajesh Tripathi, A Nayyer, Properties and effects of organic additives on performance and emission characteristics of diesel engine: A comprehensive review, Environmental Science and Pollution Research, 25 (23), 22475-22498, 2018. (SCI)
  11. Chandan Kumar, K. B. Rana, B. Tripathi, Priyanka Gupta, Combustion Characteristics of Methanol Blended Diesel Fuel in CI Engine, International Journal of Pharmaceutical Sciences Review and Research, 50(1), 16, 101-104, 2018. (SCI)
  12. Chandan Kumar, K.B. Rana, B. Tripathi, A Nayyer, A cooperative study of oxygenated additive for diesel in compression ignition engine, International Journal of Renewable Energy Technology, 9(1-2), 16-27, 2018. doi.org/10.1504/IJRET.2018.090101 SCOPUS
  13. A. Jain, K. B. Rana and Brajesh Tripathi, Hygrothermal ageing effect on glass fiber composites: A review, International Journal of Advance Research in Science and Engineering, 07(02), 2018.
  14. Prince Amera, Brajesh Tripathi and K. B. Rana, Technology and Testing methods used in Autonomous cars, International Journal of Advance Research in Science and Engineering, 07(02), 2018.
  15. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Nonlinear numerical analysis of convective-radiative fin using MLPG method, International Journal of Heat and Technology, 35(4), 721-729, 2017  DOI: 10.18280/ijht.350405 (SCIE)
  16. Vyankatesh S. Kulkarni, Brajesh Tripathi, Distribution of Reinforcement and Estimation of Creep Parameters, International Journal of Engineering Technology Science and Research, 4(10), 2017
  17. Ajay Giri, Brajesh Tripathi, H.C. Thakur, 2-D CFD analysis of passenger compartment for thermal comfort and ventilation, International Journal of Engineering and Manufacturing Science, 7(1), 38-42, 2017.
  18. Ajay Giri, Brajesh Tripathi, H.C. Thakur, Investigation of Air Circulation and Temperature Distribution in Car Compartment, International Advanced Research Journal in Science, Engineering and Technology, 4(3), 30-33, 2017.
  19. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Nonlinear and Transient Heat Transfer in the Fin by a Truly Meshless Method, Indian Journal of Science and Technology, 10(31), 2017.
  20. Pushpendra Upadhyay, Brajesh Tripathi, Energy and Exergy Analysis of Trendsetting Internal Combustion Engine: A Review, International Advanced Research Journal in Science, Engineering and Technology, 4(3), 41-46, 2017.
  21. Vyankatesh S. Kulkarni, Brajesh Tripathi, Distribution of Creep Stresses and Creep Rates in Transversely Isotropic FGM Cylinder, International Journal of Engineering Technology Science and Research, 4(9), 2017.
  22. Chandan Kumar, K.B. Rana, B. Tripathi, Performance and Emission Characteristics of VCR Diesel Engine Using Diesel-Nitromethane blend, International Journal of Engineering, Technology, Science and Research, 4(6), 375-380, 2017.
  23. Vyankatesh S. Kulkarni, Brajesh Tripathi, Creep Analysis of Transversely Isotropic FGM Cylinder, International Journal of Current Engineering and Scientific Research, 4(3), 1-9, 2017.
  24. A.K. Mandal, K.B. Rana, B. Tripathi, Micro Wind Turbines: A Review, ISST Journal of Mechanical Engineering, Vol. 7 No. 1, 35-38, 2016.
  25. Chandan Kumar, K.B. Rana, B. Tripathi, A Nayyer, Performance and emission characteristics of VCR diesel engine fuelled by diesel additives blend, ISST Journal of Mechanical Engineering, 7(2), 1-3, 2016.
  26. Ravindra Gehlot, Brajesh Tripathi, Thermal analysis of holes created on ceramic coating for diesel engine piston, Case Studies in Thermal Engineering, 8, 291-299, 2016. (SCI)
  27. Vyankatesh S. Kulkarni, Brajesh Tripathi, An approach to measure manufacturing system flexibility, International Journal of Innovation in Engineering, Research and Technology, 6(2), 241-248, 2016.
  28. Vyankatesh S. Kulkarni, Brajesh Tripathi, Multitasking, International Journal of Mechanical and Production Engineering Research and Development, 6(2), 37-44, 2016.
  29. Vyankatesh S. Kulkarni, Brajesh Tripathi, A study of the quality inspection task, International Journal of Mechanical and Production Engineering, 4(2), 9-11, 2016.
  30. Vyankatesh S. Kulkarni, Brajesh Tripathi, Creep Analysis of Transversely Isotropic FGM Cylinder, International Journal of Mechanical and Production Engineering, 3(11), 34-35, 2015.
  31. Saurabh Kumar, Neha Maheshwari, Brajesh Tripathi, Computational Analysis of Different Nanofluids effect on Convective Heat Transfer Enhancement of Double Tube Helical Heat Exchanger, International Journal of Scientific Engineering and Applied Science, 1(4),444-451, 2015.
  32. Garg R, Thakur HC and Tripathi B, A Review of Applications of Mesh free Methods in the area of Heat Transfer and Fluid Flow: MLPG method in particular. International Research Journal of Engineering and Technology, 2(4), 329-338, 2015.
  33. Sharavan Kumar Dubey, Brajesh Tripathi and H.C. Thakur, Wavy surface as a solar collector: A Review, Journal of basic and applied research international, 10 (4), 135-140, 2015.
  34. Ajay Giri, Brajesh Tripathi, H.C. Thakur, Passenger Thermal Comfort in a Car: A Review, Journal of basic and applied research international, 4(3), 30-33, 2015.
  35. Sachin Mishra, Brajesh Tripathi, Sahil Garg, Ajay Kumar, Pradeep Kumar, Design and Development of a Bio-Inspired Flapping Wing Type Micro Air Vehicle Procedia Materials Science, 10, 519–526, 2015. (SCI)
  36. Ajay Kumar, Sachin Mishra, Brajesh Tripathi, Pradeep Kumar, Ish Hunar Sharma, Aerodynamic Simulation, Thermal and Fuel Consumption Analysis of Hydrogen Powered Fuel Cell Vehicle, International Journal of Vehicle Structures and Systems, 7(1), 31-35, 2015.
  37. Kumar Ajay, Tripathi Brajesh, Mishra Sachin, Kumar Pradeep, Sharma Isha Hunar, Power consumption and design optimization of a sustainable H2 fuel cell powered vehicle, Journal of Metallurgy and Materials Science, 57(3), 2015. SCOPUS
  38. Anurag Upadhyay, Pulkit Sagar, Brajesh Tripathi, Analytical Approach toward Design Optimization and Development of an Engine Mount for a Go-kart Vehicle, Journal of Aeronautical and Automotive Engineering, 2(2), 79-83, 2015.
  39. Jatinder Chhabra &Brajesh Tripathi, TPM Implementation: A lifeline to the Manufacturing Industry, International Journal of Multidisciplinary Research, 1(2), 47-55, 2014.
  40. Jatinder Chhabra &Brajesh Tripathi, Value Engineering: A Vital Tool for Improving Cost & Productivity, International Journal of Industrial Engineering & Technology, 4(6), 1-10, 2014.
  41. Jatinder Chhabra &Brajesh Tripathi, Effect of Front Surface Roughness Testing Using Pulse Echo Method on Ultrasonic on Steel Sample AISI/SAE 1038 H, International Transactions in Applied Sciences, 5(2), 239-251, 2013.
  42. Jatinder Chhabra &Brajesh Tripathi, Parameters of Non-Destructive Evaluation and Testing via Ultrasonics: An Overview, International Transactions in Applied Sciences, 4(4), 743-756, 2012.
  43. Brajesh Tripathi& Sandipan GhoshMoulic, Investigation of airflow patterns obtained from inclined ceiling diffuser inside a closed area, Journal of Applied Fluid Mechanics, 5(4), 1-11, 2012. (SCI/ Scopus).
  44. Brajesh Tripathi& Sandipan GhoshMoulic, Numerical evaluation of inclined ceiling diffuser on ‎buoyancy and airflow patterns in an enclosed space, CFD Letters, 3(1), 48-64, 2011. (Scopus/SCI)
  45. B. Tripathi& S. G. Moulic, Investigation of the buoyancy affected airflow patterns in the enclosure subjected at the different wall temperatures, Energy and Buildings, 39, 906-912, 2007. (SCI/Scopus)
  46. B. Tripathi& S. G. Moulic, Investigation of the airflow patterns inside the room through the low k-ε model, International journal of Heat and Technology, 25(1), 25-31, 2007. (SCI/ Scopus)
  47. B. Tripathi& S. G. Moulic and R. C. Arora, A CFD Analysis of room aspect ratio on the effect of buoyancy and room airflow, Thermal Science, International Scientific Journal, 11(4), 79-94, 2007. (SCI/Scopus)
  48. B. Tripathi& S. G. Moulic, Thermal analysis of a core catcher made of a pebble bed located inside the reactor pressure vessel, International journal of Heat and Technology, 23(1), 21-29, 2005. (SCI/Scopus).
 Conference  Details:
International Conferences/National Conferences:

  1. P. Upadhyay, B. Tripathi and K.B. Rana, Computational Fluid Dynamics Analysis of Homogeneous Charge Compression Ignition Engine on IC Engine Domain, International conference (SUSCOM-2019), AMITY University, 25-26 March 2019, 395.
  2. Rajul Garg, Harishchandra Thakur and Brajesh Tripathi, Nonlinear heat conduction in a semi-infinite solid with specific surface convection, 7th International Conference on Advancements in Engineering And Technology (ICAET-2019), BGIET Sangrur, 3, 15-16 March 2019.
  3. Ajay Giri, Brajesh Tripathi and Harishchandra Thakur, Suffocation and Computational Modeling of Cabin of Parked Car for Ventilation of Heat, 7th International Conference on Advancements in Engineering And Technology (ICAET-2019), BGIET Sangrur, 5, 15-16 March 2019.
  4. Girija &B.Tripathi, Review on advanced turbulence flow RANS models, 14th International conference on Recent Trends in Engineering Science and Management (ICRTESM-19), VCET, Bundi, 16 Feb 2019. (ISBN: 978-93-87793-71-2)
  5. Mahavar, M, B.Tripathi& K.B. Rana, Review on nano fluids and advance heat transfer fluid and its thermal conductivity effecting factors, International Conference in Engineering, Technology, Management and Research (ICRIETMR-2018), BKIT, Kota, 24-25 Dec 2018.
  6. Chandan Kumar, K.B. Rana, Brajesh Tripathi and Ashish Nayyar, Evaluation of Combustion Characteristics of Diethyl Ether–Nitromethane–Diesel Blends in CI Engine, 3rd Sustainable Energy and Environmental Challenges (SEEC), IIT Roorkee, Dec. 18-21, 2018.
  7. Rajul Garg, Harishchandra Thakur, Brajesh Tripathi, Numerical Analysis of a Semi- Infinite Solid with Temperature- Dependent Thermal Conductivity using truly Meshfree Method, 6th International Conference on Advancements in Engineering and Technology (ICAET-2018), BGIET, Sangrur, 11, 23-24 February, 2018.
  8. Ankush Jain, K. B. Rana and Brajesh Tripathi, Hygrothermal ageing effect on glass fiber composites: A review, 13th International conference on recent trends in Engineering Science and Management (ICRTESM-18), VCET Bundi, 21-22 Jan 2018. (ISBN: 978-93-86171-93-1)
  9. Prince Amera, Brajesh Tripathi and K. B. Rana, Technology and testing methods used in  autonomous cars, 13th International conference on recent trends in Engineering Science and Management (ICRTESM-18), VCET Bundi, 21-22 Jan 2018. (ISBN: 978-93-86171-93-1)
  10. Naveen Sain, Ashish Nayyar, Chandan Kumar, Kunjbihari Rana and Brajesh Tripathi, Effect of Nitromethane–n-Butanol–Diesel Blends on the Emission of a Diesel Engine, 156, ICAER 2017.
  11. Vyankatesh S. Kulkarni &Brajesh Tripathi, Distribution of Creep Stresses and Creep Rates in Transversely Isotropic FGM Cylinder, 4th International Conference on New Frontiers of Engineering, Science, Management and Humanities (ICNFESMH-2017), IETE, Osmania University, Hyderabad, 3 September 2017. (IETEH893)
  12. Vyankatesh S. Kulkarni &Brajesh Tripathi, Distribution of reinforcement and estimaton of creep parameters, 3rd International conference on Science, Technology and Management (ICSTM-2017), MCCIA Pune, 5 Nov 2017. (MCCIA893)
  13. Chandan Kumar, KB Rana, B. Tripathi, Performance and Emission Characteristics of VCR Diesel Engine Using Diesel-Nitromethane blend, 2nd International Conference on New Frontiers of Engineering, Science, Management and Humanities (ICNFESMH-2017), National Institute of Technical Teachers Training & Research, Chandigarh, June 2017. (ISSN: 2394-3386, NITTTR744).
  14. Vyankatesh S. Kulkarni &Brajesh Tripathi, Creep analysis of transversely isotropic FGM cylinder, 15 International Conference on academics Research in engineering Sceince and Technology (AREST-2017), PRO India, Pune, 12 March 2017.
  15. Pushpendra Upadhyay, Brajesh Tripathi, Energy and Exergy Analysis of Trendsetting Internal Combustion Engine: A Review, Cutting Edge Technological Challenges in Mechanical Engineering(CETCME-2017), Noida Institute of Engineering & Technology (NIET), Greater Noida, February 2017.
  16. Chandan Kumar, Kunj bihari Rana, Brajesh Tripathi, Ashish Nayyar, A Comparative Study of Various Parameters of Additives-Diesel Fuel Blend of Compression Ignition Engine, International Conference on New and Renewable Energy Resources for Sustainable Future, SKIT, Jaipur, Feb, 2017.
  17. Chandan Kumar, Kunj Bihari Rana, Brajesh Tripathi, A Comprehensive Study on Variable Compression Ratio Diesel Engine for Optimizing Performance and Reducing Emission,  International Conference on New and Renewable Energy Resources for Sustainable Future, SKIT Jaipur, Feb, 2017.
  18. A. K. Mandal, K.B. Rana , B. Tripathi, C. Kumar, A comprehensive review on small scale wind turbines, International Conference New and Renewable Energy Resources for Sustainable Future, SKIT Jaipur, Feb, 2017.
  19. Chandan kumar, Kunj Bihari Rana, Brajesh Tripathi, Ashish nayyar, Performance and Emission Characteristic of C.I. Engine Using Additive: A Review, All India Seminar on Emerging Trends in Automobile Engineering, at The Institution of Engineers, Alwar, October, 2016.
  20. Chandan Kumar, Kunj Bihari Rana, Brajesh Tripathi, Ashish nayyar, Performance of Emission Characteristics of VCR Diesel Engine Fulfilled by Diesel – Additives Blend, National Conference on  Renewable Energy Sources and Sustainable Development: Opportunities and Challenges, Jaipur Engineering College and Research Center, Jaipur, Oct 2016.
  21. Vyankatesh S. Kulkarni and Brajesh Tripathi, Multitasking, International conference on emerging research trends in applied engineering and technology (ICERAT 2016) KGCE Karjat, 1-2 April 2016. (ISBN: 978-93-5258-409-3)
  22. Vyankatesh S. Kulkarni and Brajesh Tripathi, An approach to measure manufacturing system flexibility, Proceedings of international conference on innovative trends in engineering research (ICITER-2016), NP Pune, 241-244, 26 June 2016.23.
  23. Vyanktesh Kulkarni &Brajesh Tripathi, A study of the quality inspection task, International Conference on Computer science and Mechanical Engineering (ICCSME-2015), IRJ Pune, 27 dec 2015(IR-ICCSMEPUN-2712150-500).
  24. Ravindra Gehlot, Brajesh Tripathi, A review of thermal barrier coating for IC engine, 5th International conference on advane trends in engineering, technology and research (ICATETR-2015), BKIT Kota, 23-24 Dec, 2015.
  25. Anurag Upadhyay, Pulkit Sagar, Brajesh Tripathi, Analytical Approach toward Design Optimization and Development of an Engine Mount for a Go-kart Vehicle, 10th International Conference on Advances in Mechanical, Material Science, Manufacturing, Automobile, Aerospace Engineering and Applied Physics, Jawaharlal Nehru University, New Delhi, India,  Krishi Sanskriti, 30-31 May, 2015.
  26. Anuj Gupta, Ankit Verma and Brajesh Tripathi, Designing an integrated system of IC engine mountings and air conditioning system, Cutting Edge Technological Challenges in Mechanical Engineering, MMU Mullana, India, 3-6, 2015. (ISSN : 2229-5828)27.  
  27. Anuj Gupta and Brajesh Tripathi, Study of building aerodynamics for designing natural ventilation, Cutting Edge Technological Challenges in Mechanical Engineering, MMU Mullana, India, 14-18, 2015. (ISSN : 2229-5828)
  28. Neha Priyadarshi and Brajesh Tripathi, Reliability, Maintainability and Availability of manufacturing machines in industries – A review, Cutting Edge Technological Challenges in Mechanical Engineering, MMU Mullana, India, 19-24, 2015.
  29. Manish Nair and Brajesh Tripathi, Experimental studies on thermoelectric refrigeration system, Cutting Edge Technological Challenges in Mechanical Engineering, MMU Mullana, India, 63-67, 2015.
  30. Brajesh Tripathi, Sachin Mishra, Sahil Garg, Ajay Kumar, Pradeep Kumar, An RF Relay Based Control and Communication System for Unmanned Ground Vehicle and Micro Air Vehicle, 2nd International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth’s Institute of Computing Application and Management(BVICAM), India, Published by IEEE, 11-13 March, 2015.
  31. B. Tripathi, A. Kumar, S. Mishra, Power Consumption and design optimization of H2 fuel cell vehicle, International Conference on Processing of Lean Grade and Urban Ores (IC-LGO 2015), CSIR-National Metallurgical Laboratory, Jamshedpur, India, 20-22 January, 2015.
  32. A. Kumar, S. Mishra, B. Tripathi, Design Optimization of A Sustainable Hydrogen Fuel Cell Powered Vehicle for Low Power Consumption, International Conference on Newest Drift in Mechanical Engineering, ICNDME-14, MM University, Mullana, India, 20-21 December, 2014.
  33. A. Kumar, S. Mishra, B. Tripathi, Thermal Performance and ventilation Design Optimization of a Hydrogen Fuel Cell Powered Vehicle’s Rear Compartment, International Conference on Newest Drift in Mechanical Engineering, ICNDME-14, MM University, Mullana, India, 20-21 December, 2014.
  34. S. Mishra, A. Kumar, B. Tripathi, Modelling and Simulation of Glass/Epoxy Composite Layup for Hydrogen Fuel Cell Powered Vehicle’s Body, 23rd International Conference on Processing and Fabrication of Advanced Materials, IIT Roorkee, Roorkee, India, 5-7 December, 2014.
  35. Brajesh Tripathi, Sachin Mishra, Sahil Garg, Ajay Kumar, Effect of ergonomics on Aerodynamic Optimization Of a Single Seater Hydrogen Powered, International Ergonomics Conference on HWWE 2014, IIT Guwahati, India, 3-5 December, 2014.
  36. Roshan Antony, Brajesh Tripathi, Ajay Kumar, Sahil Garg, Sachin Mishra, Pradeep Kumar, Design and Development of a Mechanism for a Tailless Flapping Wing Micro Air Vehicle, 3rd Elsevier International Conference on Recent Advances in Design, Development and Operation of Micro Air Vehicles, JNTUH, Hyderabad, India, 5-7 November, 2014.
  37. S. Mishra, A. Kumar, B. Tripathi, Design and Development of a Bio-Inspired Flapping Wing Type Micro Air Vehicle, 2nd International Conference on Nano-materials and Technologies, VCE Hyderabad, India, 17-18 October, 2014.
  38. B. Tripathi, Numerical analysis of aerodynamics on heating, ventilation and air-conditioning (HVAC) system on a hemispherical building, 49th  annual conference on aerodynamics, Lille, France, 24-26, March, 2014.
  39. B. Tripathi& H.C. Thakur, A parametric turbulent modeling on time decaying effect of gas transport in packaging design, 11th Biennial Conference of the Indian Society of Industrial and Applied Mathematics, Emerging Mathematical Methods, Models and Algorithms for Science and Technology,15-16 Dec. 2012. 
  40. Brajesh Tripathi, Maria Rubino, Rafael Auras, Bassam Annous & Karl Matthews, CFD simulation of the distribution of ClO2 in fresh produce to improve safety, IFT 2010, McCormick Place, Chicago, USA, 232-18, 2010.
  41. Brajesh Tripathi, Maria Rubino, Rafael Auras, Bassam Annous & Karl Matthews, CFD modeling to improve safe and efficient distribution of chlorine dioxide gas for packaging fresh produce, IFT 2010, McCormick Place, Chicago, USA, 087-17, 2010.
  42. Brajesh Tripathi, Maria Rubino & Rafael Auras, A computational fluid dynamics (CFD) model intended for fluid flow prediction inside a modified atmosphere packaging container. Symposium on Inverse problems 2010, Michigan State University, East Lansing, USA, 2010.
  43. B. Tripathi, S. K. Mishra and A. Kumar, Mathematical description of Thermo-electrochemical Performance of Fuel Cells Exhibition, Proceedings of National Conference on New and Renewable energy, BIT Mesra, Ranchi, India, 25-32, 2007.
  44. B. Tripathi, R. C. Arora and S. G. Moulic, Prediction of Flow Behavior on Diffuser Angle in an Enclosure, Proceedings of ASME Fluids Engineering Division Summer Meeting and Exhibition, TX, USA, 647-650, 2005.
  45. B. Tripathi, R. C. Arora, S. G. Moulic, CFD analysis of variation of room width on air movement inside a room, Proceedings of 4th International Conference on Computational Heat and Mass Transfer (ICCHMT2005), FRANCE, 520-523, 2005.
  46. Tripathi B., Arora R. C. & Moulic S. G., Analysis of buoyancy of square enclosures on airflow patterns, 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2005), Cairo, Egypt, TB1-5, 2005.
  47. B. Tripathi, R. C. Arora and S. G. Moulic, Analysis of Inlet Angle on Buoyancy Affected Room Airflow, Proceedings of the SIAM Conference on Computational Science and Engineering, Florida, 2005.
  48. R. C. Arora, B. Tripathi and S. G. Moulic, Investigation of the buoyancy flow over the room space constituent, Fourth International Conference on CFD in the Oil and Gas, Metallurgical & Process Industries SINTEF / NTNU Trondheim, Norway, 2005.
  49. B. Tripathi, R. C. Arora and S. G. Moulic, Prediction of Flow Behavior on Diffuser Angle in a Enclosure, Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting and Exhibition, Houston, TX, 77222-26, 2005.
  50. B. Tripathi, R. C. Arora and S. G. Moulic, Numerical integration of fluid flow inside side mounted diffuser, 31st National conference on fluid mechanics & fluid power (NCFMFP), Jadavpur University, Kolkata, India, 1284-1296, 2004.
  51. B. Tripathi, R. C. Arora and S. G. Moulic, Effect of buoyancy on room air flow, Proceedings of Heat Transfer/Fluids Engineering Summer Conference (HTFED2004), North Carolina, USA, 56878-83, 2004.
  52. B. Tripathi, R. C. Arora and S. G. Moulic, CFD analysis of the effect of buoyancy on room air flow, Proceedings of 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2004), Cape Town, South Africa, TB1-4, 2004.
  53. B. Tripathi, R. C. Arora and S. G. Moulic, Effect of Grashof Number on Laminar Room Air Flow, Proceedings of the Sixth ISHMT-ASME Heat and Mass Transfer Conference and 17th National Heat and Mass Transfer Conference, IGCAR, Kalpakkam, India, pp. 145-150, , 2004.
  54. R. V. Sharma and Brajesh Tripathi, Influence of Property Variation on Natural Convection in a Gas Filled Rectangular Enclosure, Proceedings of the 5th ISHMT-ASME Heat and Mass Transfer Conference and 16th National Heat and Mass Transfer Conference, Kolkata, India, 113-119, 2002.: Publications in International book-chapters/books
  55. Brajesh Tripathi, Maria Rubino, Rafael Auras, Siriyupa Netramai, Bassam Annous & Karl Matthews, “CFD Simulation and Designing Disinfected Gas in Containers”, Futures, Michigan Agricultural Experiment Station, Vol. 28 (2&3), Summer/Fall 2010.
 Seminar/Symposia/Workshop/Conference/STC Organized:
 

Year Conferences/ workshop/short term Duration Organization
2018-2019 Workshop on MOOC and Swayam 04 x02 days TEQIP-III, RTU Kota and 4 other institutions
2018 Unmanned Aerial Vehicle Dec-03-05, 2018 TEQIP-III, RTU Kota, SOA Neemrana
2018 STC on energy Mar 19-23, 2018 CoE Udaipur and RTU Kota
2018 Twinning workshop on CFD Mar 18-22, 2018 JU and RTU Kota
2017 Nanotechnology for Instrumentation and Measurement Workshop(III International Conference) Nov 16-17, 2017 Gautam Buddha University
2015 STC on Communication Skills. Nov 02-06, 2015 NITTTR and RTU
2015 STC on Resent trends on Automobile Technology Aug 10-14, 2015 NITTTR and RTU
2014 Workshop on Quad copter. Nov 14-15, 2014 Gautam Buddha University
2014 Workshop on Automobile Design. Sept 08-10, 2014 Gautam Buddha University
2013 Workshop on Solidworks. Nov 12-14, 2014 Gautam Buddha University
2005 Short-term course on Cooling Towers. April 18-22, 2005 IIT Kharagpur
2004 Workshop on Alternate Refrigerants and Cycles. Jan 28-30, 2004 IIT Kharagpur
Ongoing Project:
Year Organization/s Project Name
2019-2020 MHRD-CRS

(Co-PI)

 Performance Analysis of emission characteristics of VCR diesel engine for different blends
2019-2020 MHRD-CRS

(Co-PI)

 Performance Improvement of Solar Stillsystem by Integrating with ParaboloidalConcentrator
2019-2022 ISRO-RESPOND

(PI)

 Development of numerical model/algorithms on Aerosol dispersion
2016 – 2019 BRNS, Mumbai

(Co-PI)

 Reliability analysis of intelligent transmitter
2012 – 2014 White metals limited, GNIDA, and Shell Asia

(PI)

 Hydrogen Fuel cell based Vehicle automobile for Shell Eco Marathon– Asia.
2012 – 2013 CSIR-NAL, DRDO-ADE &GBU

(PI)

 Design and development of a flapping Wing Micro Air Vehicle Having Tendency to glide and hover
Professional Affiliation:
1.      Associate Member, Society of Automotive Engineers (SAE).

2.      Life Member, MSUPDA.
Books Published:
Research Supervised:
8.1: Doctoral Dessertations (Ph.D.)

S. No. Year Status Name of the Candidate Ph.D. Project Title
1 2018 In Progress(Main) Ankit Agrawal Design and analysis of Solar Still
2 2017 In Progress

(Main)

 Kapil Nahar Computational Fluid Dynamics of aerosols inside the hospital disinfected rooms and office buildings
3 2017 In Progress(Main) Sanjay Kumar Experimental Analysis of blended diesel fuel.
4 2016 In Progress(Co) Amit K Mondal CFD analysis of micro wind turbines.
5 2016 In Progress(Main) Chandan Kumar Experimental Analysis of additives in diesel fuel and emission characteristics
6 2014-2018 Submitted

(Main)

 Late Vyankatesh S. Kulkarni Modelling and analysis of steady state creep response in functionally graded material under contrastive conditions.
7 2013-2019 Awarded(Main/co) Ajay Giri CFDAnalysis of HVACof a Passenger Car for Improving Safety, Comfort and Energy Saving
8 2013-2018 Awarded(Co) Rajul Garg Nonlinear heat transfer and fluid flow problems using MLPG method.
9 2013-2016 Awarded(Main/co) Jitender Chabbra Surface roughness and its effect on ultrasonic testing.
10 2011-2014 Awarded(Main) Prasad S. Kulkarni Discrete study of developing low-conductance window frames: capabilities and limitations of current window heat transfer design tools.
11 2011-2014 Awarded(Main) Rajendra S. Power Study of recent development in thermal driven cooling and refrigeration systems.

 

8.2: Master’s Dessertations (M. Tech.)

S. No. Year Status Name of the candidate Project Title
1 2018 Ongoing Girija Mehra CFD analysis of data center cooling
2 2018 Ongoing Mahavir Kumar Meghvanshi CFD Analysis of Operation theater in hospitals
3 2017 Ongoing Mohd. Suhail CFD Analysis of Central solar plant
4 2017 Ongoing Prince Amera Inlet Flow Simulation of an I. C. Diesel Engine  using Computational Fluid Dynamics
From To No. of M. tech. Awarded
2016 2020 04
2011 2015 15
2008 2010 03
Achievements

  1. 2020: Appreciation from MHRD for contribution on MOOC’s and Swayam courses.
  2. 2016: Best Paper Award for article in International Journal of Mechanical and Production Engineering.
  3. 2015: Best Paper Award for article in International Journal of Industrial Engineering & Technology.
  4. 2014: Nominated by National Advisory Committee for Jawaharlal Nehru Science Fellowship.
  5. 2014: Selected as Visiting Researcher, Centre for Renewable and Clean Energy, Cranfield University, UK.
  6. 2014: Awarded Best Mentor of UG students, Gautam Buddha University
  7. 2013: Selected as Visiting Researcher, Centre for Renewable and Clean Energy, Cranfield University, UK.
  8. 2013: Selected as Post Doc in REQUIMTE, FCT/UNL at Faculty of Science and Technology, New University of Lisbon, Portugal.
  9. 2012: Selected as Certified Research Supervisor at UPTU, Lucknow.
  10. 2012 – Continuing: Associate Member, SAEINDIA, (Northern), India.
  11. 2012: Book chapter selected on International Energy and Environment Foundation.
  12. Technical Expert panel list: Journal of Applied Fluid Mechanics, CURIE journal, International Journal         of Informative and futuristic research and KAAV International Journal of Science, Engineering & Technology, GritWings Inc and Infileague Inc.
  13. 2009 – Continuing: Reviewer of Journal of Applied Fluid Mechanics and CURIE journal.
  14. 2008-2011: Post-doc Fellowship (USDA), Michigan State University, USA.
  15. 2008: Biography selected in who is who in the world, New York Edition.
  16. 2004-2008: Selected and awarded EFIP-2004 program of AICTE, New Delhi, India.
  17. 2001- 2005: Institute Scholarship for pursuing Ph.D. from MHRD, India.
  18. 2001: Ranked 1st in M. Tech. (Mechanical) at NIT Jamshedpur, India.

 

 

Events / News